Proper design and maintenance of this system increases drilling efficiency (high rate of penetration) and lowers the overall drilling cost. Hydraulics system plays an important role during rotary drilling operations.
The user-friendly program can be used for a quick evaluation of the optimization process.ĬHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY Nanoparticles can be deplored in high pressure, high temperature (HPHT) locations.
Hole related problems associated with conventional drilling fluids can be eliminated by the use of nano-engineered fluids. However, using a low density and low viscosity base fluid, with lower density and concentration of nanoparticles would reduce the effect of increase in the density and viscosity of the mixture.Ĥ. The increase in density and viscosity of the nanofluid compared to the base fluid leads to the need for a higher capacity pump to flow the system. This phenomenon is compounded when the fluid is not in the laminar flow regime.ģ. The Crittendon correlation overestimates the values of the annular pressure gradient and ECD for various rheological models. The Hydraulic Radius Concept, Slot Approximation, and Lamb’s Method give almost the same pressure gradients for various rheological models.Ģ. A user-friendly computer program was written to facilitate repeated analyses using any combination of rheological model and equivalent annular diameter definitions for the conventional drilling fluids for all ranges of inclination using the Rudi Rubiandini’s cuttings transport model. The conclusions drawn are:ġ. The impacts of rheological models and equivalent annular diameter definitions on annular pressure loss and ECD were examined for the conventional drilling fluids while aluminium oxide nanoparticles were used to examine the influence of nanofluids on the annular pressure gradient and ECD. They possess unique characteristics that differentiate them from microparticles, and make them adaptable to a wide range of applications. The nanoparticles are particles with an average diameter of less than 100nm. Nanofluids are specialized fluids obtained by careful combination of nanoparticles and a base fluid. A properly designed hydraulic system will help to improve drilling efficiency and lower drilling time and cost. This thesis examines hydraulics optimization using conventional drilling fluids and nano-based drilling fluids. Hydraulics optimization is an attempt to maximize the pressure drop across the bit by minimizing the parasitic pressure losses.
The Hydraulics system shares common purposes with the drilling fluid, it helps to control subsurface pressures, remove cuttings from the well, clean the bit, size the pump, increase the rate of penetration, and minimize surge and swab pressures. DIRECTIONAL DRILLING HYDRAULICS OPTIMIZATION USING CONVENTIONAL AND NANOBASED DRILLING FLUIDSĭuring drilling operations, special attention must be given to wellbore hydraulics to ensure functional, safe, economic, and environmentally responsible delivery of the well.
0 kommentar(er)
